[modify_fsurdat_basic_options]

lat_dimname = lsmlat
lon_dimname = lsmlon

# idealized (bool)
# When user wants existing values in fsurdat to persist in all except the
# variables that they explicitly request to change, then set this to False.
# When user wants idealized representation of the land by resetting all
# fsurdat variables, some through this file and others by using hardwired
# defaults, then set this to True.
idealized = False

#  subgrid section to set the PCT_* variables
process_subgrid_section = True
# Variable list section to set specific variable names
process_var_list_section = True

# Boundaries of user-defined rectangle to apply changes (float)
# If lat_1 > lat_2, the code creates two rectangles, one in the north and
# one in the south.
# If lon_1 > lon_2, the rectangle wraps around the 0-degree meridian.
# Alternatively, user may specify a custom area in a .nc landmask_file
# below. If set, this will override the lat/lon settings.
# -----------------------------------
# (Use a grid that includes the entire globe as we are just setting a single point)
# southernmost latitude for rectangle
lnd_lat_1 = -90
# northernmost latitude for rectangle
lnd_lat_2 = 90
# westernmost longitude for rectangle
lnd_lon_1 = 0
# easternmost longitude for rectangle
lnd_lon_2 = 360
# user-defined mask in a file, as alternative to setting lat/lon values
landmask_file = UNSET

# PFT/CFT to be set to 100% according to user-defined mask.
# If idealized = True and dom_pft = UNSET, the latter defaults to 0
# (bare soil). Valid values range from 0 to a max value (int) that one can
# obtain from the fsurdat_in file using ncdump (or method preferred by user).
# The max valid value will equal (lsmpft - 1) and will also equal the last
# value of cft(cft). Cannot be set with evenly_split_cropland = True.
dom_pft = UNSET

# If True, evenly split each gridcell's cropland among all crop types (CFTs).
# Can only be True if dom_pft is UNSET.
evenly_split_cropland = False

# LAI, SAI, HEIGHT_TOP, and HEIGHT_BOT values by month for dom_pft
# If dom_pft = 0, the next four default to 0 (space-delimited list
# of floats without brackets).
lai = UNSET
sai = UNSET
hgt_top = UNSET
hgt_bot = UNSET

# SOIL_COLOR accepts integer values from 1 to 20 (see CTSM Technote for info).
# if idealized = True and soil_color = UNSET, soil_color = 15.
soil_color = UNSET

# STD_ELEV (standard deviation of elevation) value (in meters) over the
# user_defined mask (float).
# if idealized = True and std_elev = UNSET, std_elev = 0.
std_elev = UNSET

# FMAX (maximum fractional saturated area) value (fraction) over the
# user_defined mask (float).
# if idealized = True and max_sat_area = UNSET, max_sat_area = 0.
max_sat_area = UNSET

# Set non-vegetation landunits to 0 (bool).
zero_nonveg = False

# Include other land units besides vegetated
include_nonveg = True

# Section for subgrid_fractions
[modify_fsurdat_subgrid_fractions]
# If subgrid_fractions = True this section will be enabled

# NOTE: PCT_URBAN must be a list of three floats that sum to the total urban area
PCT_URBAN = 100.0 0.0 0.0
PCT_CROP = 0.0
PCT_NATVEG= 0.0
PCT_GLACIER= 0.0
PCT_WETLAND= 0.0
PCT_LAKE = 0.0
PCT_OCEAN = 0.0

# Section with a list of variables to prcoess
[modify_fsurdat_variable_list]
# IMPORTANT NOTE: Config file strings are case inssentive!
#
# As such it will check for variable names both in lower case and upper case.
#
# If variable_list = True this section will be enabled
# Can't specify PFT as they are in dom_pft
# Add variables on the file and assign a new value
# can't specify soil_color, max_sat_area or other things that are above.

# URBAN_REGION_ID MUST be set, when there is urban area
URBAN_REGION_ID = 2

# Variables on numurbl which is 3
CANYON_HWR = 0.42 0.42 0.42
EM_IMPROAD = 0.973 0.973 0.973
EM_PERROAD = 0.973 0.973 0.973
EM_ROOF = 0.973 0.973 0.973
EM_WALL = 0.973 0.973 0.973
HT_ROOF =  6.4  6.4  6.4
THICK_ROOF = 0.1141 0.1141 0.1141
THICK_WALL = 0.1489 0.1489 0.1489
T_BUILDING_MIN = 200.0 200.0 200.0
WIND_HGT_CANYON = 3.2 3.2 3.2
WTLUNIT_ROOF = 0.445 0.445 0.445
WTROAD_PERV = 0.68 0.68 0.68
# NOTE: This variable is integer rather than float
NLEV_IMPROAD = 4 4 4

# Variables on numrad which is 2
ALB_IMPROAD_DIR = 0.15 0.15
ALB_IMPROAD_DIF = 0.15 0.15
ALB_PERROAD_DIR = 0.15 0.15
ALB_PERROAD_DIF = 0.15 0.15
ALB_ROOF_DIR = 0.21 0.21
ALB_ROOF_DIF = 0.21 0.21
ALB_WALL_DIR = 0.21 0.21
ALB_WALL_DIF = 0.21 0.21

# Variabls on nlevurb which is 4 for this site
TK_ROOF    = 6.530 0.025 0.230 0.160
TK_WALL    = 0.610 0.430 0.024 0.160
TK_IMPROAD = 1.170 0.300 0.300 0.420
CV_ROOF    = 2070000.0    7100.0 1500000.0  670000.0
CV_WALL    = 1250000.0 1400000.0    1300.0  670000.0
CV_IMPROAD = 1140000.0 1050000.0 1050000.0 1290000.0

# Natural and Crop PFT's don't really need to be set, since they have zero area, but
# it looks better to do so
PCT_NAT_PFT = 100. 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PCT_CFT     = 100. 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0